Jump to content

PSP Networking


Koloth

Recommended Posts

Greetings,

 

Okay I suckered and took a deal on a PSP. I've got a wireless network using WEP (due to old devices) and I use a 128 bit key which requires I enter 26 hex digits for the key. On the PSP I seem to only be able to enter about 12 characters then it stops taking input. There doesn't seem to be a way to select the strength of WEP being used (64 or 128 bit).

 

The PSP system software is v3.71. I just updated it to the latest I could find.

 

Any network savy/PSP people out there ?

Link to comment
Share on other sites

Have you tried entering the 13 ASCII symbols corresponding to each pair of hex digits? Of course, this might not be possible if you use too small or too big values for each pair (00 or FF)

 

How about official pages/sources? While you can wait for someone to show up and knows how to do this you might be better of checking some places out.

Link to comment
Share on other sites

I figured that out and have changed the network to use a shorter key. I can now enter the whole key into the PSP. This hasn't worked so far, so I've got to go back and carefully confirm that I've got everything set to the same key. (yeah, it's been low priority). I did confirm that the networking works by connecting to a STAPLE's WiFi network last night with the PSP. At least that means that the "radios" work. I'll get it eventually. Thanks for your help.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
  • Create New...